User's Manual

ManualsBrandsTrisquare Communications ManualsAudio EquipmentWIRELESS MICROPHONE SYSTEM-BASE

Operating Instructions For ICOP 20/20 WMIC & 20/20 WBASE

Items included in this package with part numbers

No. Quantity Model No. Description ICOP Part No.

1 1 20/20 WBASE BASE Transceiver 600-00145

2 1 2020RHT MIC Transceiver 600-00146

3 1 N/A Rubber Duck Antenna 600-00143

4 1 N/A Roof Mount Antenna 600-00142

5 1 N/A 12V Cable 082-00169

6 1 N/A Lapel Mic 600-00144

System description:

The ICOP 2020 wireless microphone system operates as part of ICOP’s DVR (digital video

recorder) system.

The ICOP 2020 Wireless Microphone System consists of 2 transceivers. The first

transceiver, called the BASE Transceiver (2020 WBASE), is mounted inside the vehicle.

The BASE Transceiver must be connected to the JBOX (junction box) to interface audio

and control signals to the DVR. The BASE Transceiver consists of two receivers and one

transmitter, a SMA connector for connection of one of the 2 optional antennas, an RJ-45

connector, and 2 docks for charging and syncing 2 MIC transceivers.

The second transceiver, called the MIC Transceiver (2020 WMIC), is carried by the

patrolman either on his belt or lapel. The MIC Transceiver is a self-contained unit, which

includes an internal microphone, external microphone/charge jack, battery charge

Summary of content (7 pages)

PAGE 1
Operating Instructions For ICOP 20/20 WMIC & 20/20 WBASE Items included in this package with part numbers No. Quantity Model No. Description ICOP Part No. 1 2 3 4 5 6 1 1 1 1 1 1 20/20 WBASE 2020RHT N/A N/A N/A N/A BASE Transceiver MIC Transceiver Rubber Duck Antenna Roof Mount Antenna 12V Cable Lapel Mic 600-00145 600-00146 600-00143 600-00142 082-00169 600-00144 System description: The ICOP 2020 wireless microphone system operates as part of ICOP’s DVR (digital video recorder) system.
PAGE 2
terminals, internal rechargeable battery, fixed antenna, and 3 buttons for Standby/Off, Help and Transmit Record On/Off. The system operates in the 900 MHz ISM (Instrument Scientific Medical) band and is license free. The system range is 1000 feet. The ICOP 2020 Wireless Microphone System uses Frequency Hopping Spread Spectrum (FHSS) Narrow Band FM, which provides excellent privacy, security and avoidance of interference.
PAGE 3
1. If the inserted MIC is the only MIC currently synced to that BASE, the MIC shall stop transmitting audio and shall transmit a data packet with the security code and the turn off command to the BASE unit to stop recording. 2. If the inserted MIC is one of two MICs currently synced to that BASE and it is in an active record session, the MIC shall stop transmitting audio and shall transmit a data packet with the security code and the turn off command to the BASE unit to stop recording.
PAGE 4
20/20 WMIC Record Button Lapel Mic Jack Power Button Red LED Green/Yellow LED Help Button Microphone Charge and Sync Terminals on Bottom Operating instructions: The MIC Transceiver has a 550 mA hour rechargeable battery pack accessible by removing the belt clip and battery compartment cover . Prior to the first use the battery should be charged for 12 to 15 hours.
PAGE 5
4. If the inserted MIC is the only MIC currently synced to that BASE, the MIC shall stop transmitting audio and shall transmit a data packet with the security code and the turn off command to the BASE unit to stop recording. 5. If the inserted MIC is one of two MICs currently synced to that BASE and it is in an active record session, the MIC shall stop transmitting audio and shall transmit a data packet with the security code and the turn off command to the BASE unit to stop recording.
PAGE 6
LED goes off. The green LED will turn ON for the duration of the Power Button, press up to 1 second. If held for 1 second when the RHT is in the OFF mode, the RHT will enter the Standby mode. 5) CHARGE Mode The MIC Transceiver will be in CHARGE mode while docked in the BASE. The MIC Transceiver LED indicators may be turned OFF by the user for those conditions where the bright light emitted from them is undesirable. The LEDs will always default to ON when the unit is powered on.
PAGE 7
Unauthorized modifications to this equipment could void the user’s authority to operate this equipment. Warranty ICOP Digital, Inc will, without charge, repair or replace, at its option, defective components of the 20/20 Wireless Microphone system upon delivery to the ICOP Factory Service department, accompanied by proof of the date of purchase, such as a duplicated copy of sales receipt.