User's Manual

terminals, internal rechargeable battery, fixed antenna, and 3 buttons for Standby/Off, Help
and Transmit Record On/Off.
The system operates in the 900 MHz ISM (Instrument Scientific Medical) band and is
license free. The system range is 1000 feet. The ICOP 2020 Wireless Microphone System
uses Frequency Hopping Spread Spectrum (FHSS) Narrow Band FM, which provides
excellent privacy, security and avoidance of interference.
BASE Transceiver Model Number 20/20 WBASE
Operating Instructions:
Depending on the installation, the BASE Transceiver will have power applied at all times or
only when the ignition switch is on. The BASE Transceiver (20/20 WBASE) may be used
with one or two MIC Transceivers.
To synchronize or resynchronize the BASE Transceiver to one or two MIC Transceivers,
place the MIC Transceiver unit(s) into the BASE Chargers. Synchronization shall occur
automatically with any MIC transceiver(s) that are docked in the BASE.
When the MIC is inserted into the BASE charger, the MIC shall turn on if it is not already
on. If the MIC is already in the BASE when the BASE is powered on, the MIC shall turn on.
If 5 minutes passes with no activity, the MIC shall go to stop mode.
If a record session is active when a MIC is placed in the BASE, one of the following
conditions will apply:
Mic Charging Ports
Antenna
Connector
(Not Shown)
Charge Status LEDs
DC Jack
RJ-45
Connector