Owner`s manual

To recharge your eXRS rechargeable battery pack either in or

out of your radio, plug the AC/DC Wall adaptor into a 120V AC

outlet, and plug the round DC connector into the back of the

desktop charger.

NOTE: This power unit is intended to be correctly oriented

in a vertical or oor mount position.

Insert either the radio facing forward, or the battery pack with the

label facing backwards and the RED charging light will illuminate.

If the charging light does not light, slightly jiggle the radio or

battery pack to ensure a good connection is being made and

the light is on. If batteries are totally discharged, recharge for 15

hours to fully charge batteries. After charging, remove and use

as needed. When not using your desktop charger, unplug and

store in a dry location.

5.2 VOX/PTT Headset (TSX-HS1) Operation:

The TriSquare TSX-HS1 PTT/VOX headset consists of 4

components, 1) the headset with boom mic assembly, 2)

the PTT/VOX Control on the cord, 3) Lapel Clip, and 4) the

connector. The headset can be used as a headset operating

in a standard Push-To-Talk (PTT) method, or automatically

transmitting using your voice to activate the transmitter (VOX).

CHANGING CLONING CHANNEL Screens

CLONING

CHANGE CHAN

COPY FROM

OK EXIT

CHANGE CLONING

CHANNEL

DELETE DONE

PTT Button and VOX / PTT Switch / Headset Plugged In

PTT Button

VOX/PTT

Switch