Instruction manual

11
TROUBLESHOOTING
Problem Possible Solution
No sound or
distorted sound?
Make sure your DVD is connected properly. Make sure all
cables are securely inserted into the appropriate jacks.
Make sure the Audio is not muted.
No Power
Ensure that power connection is firmly seated in plug
and there is power to the power supply.
Can't advance
through a movie?
You can't advance through the opening credits and
warning information that appears at the beginning of
movies because the disc is programmed to prohibit that
action.
The icon ( ) appears
on the screen?
The feature or action cannot be completed at this time
because:
The disc's software restricts it.
The disc's software doesn't support the feature (e.g.,
angles)
The feature is not available at the moment.
You've requested a title or chapter number that is out of
range.
Picture Is distorted?
The disc might be damaged. Try another disc.
It is normal for some distortion to appear during forward
or reverse scan.
No forward or
Reverse scan?
Some discs have sections that prohibit rapid scanning or
title and chapter skip.
If you try to skip through the warning Information and
credits at the beginning of a movie, you won't be able
to. This part of the movies often programmed to prohibit
skipping through it.
Problem Possible Solution
IR sensor
Inoperative?
Ensure that the batteries in the remote are fresh.
Ensure that the remote sensor eye is not obstructed.
Ensure that the infrared transmitter is affixed over the
sensor eye of the component to be controlled.
Disc won't play?
Insert a disc with the label side facing up.
Check the type of disc you put into disc tray. This DVD
only plays digital video discs, audio CDs and MPs.
Play starts, but then
stops immediately?
The disc is dirty. Clean it.
Condensation has formed. Allow player to dry out.
To Change the Remote Control Battery
1. Open the Battery Door.
2. Insert one CR2025 size battery.
3. To use the remote control, point it at the remote sensor on the player.
EN
Instruction Manual