User manual

7
Operation and maintenance UK
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz
Place the appliance on a flat stable surface and ensure a minimum of 50 cm. free space
around the unit. This device is not suitable for mounting or outdoor use.
First use
When the unit is first turned on, there will be a slight odor. This is normal, ensure adequate
ventilation. This odor is only temporary and will disappear soon.
Use
Put the plug into a grounded outlet and switch on the control switch (no. 3) on the device. Set
the desired heating mode.
0 Off
power 1000 watt
power 2000 watt
Turn the thermostat switch (no. 2) clockwise to its highest position. If the room themperature is
reached, turn the thermostat switch counter clockwise until you hear a click. The thermostat
keeps the room temperature at the same temperature.
The heating pipes do not change color when the device is turned on.
When you want to use the appliance as a fan you only have to turn the thermostat switch
(no. 2) to the left. The device does not heat, the fan will only rotate.
Never place objects on the heater, such as clothing or towels. Do not use the heater in the
bathroom or other wet areas.The grids of the stove can be very hot.
The exterior of the unit is hot. Avoid any physical contact, you can seriously get
injured. Let it cool down completely before it will be moved. Always use the handles
(no. 1) at the top of the device to move
Protection against overheating
The device is equipped with an overheat protection which automatically switch off the device
when the temperature inside the unit exceeds normal values.
This protection applies only to the device and has no effect on controlling the room
temperature.
Turn the control switch in the "0" position and set the thermostat to the lowest setting.
Pull the plug from the socket. Let the device cool down completely. Please remove objects or
dust from the air outlets, use a vacuum cleaner to clean gratings which have caused the
malfunction or overheating .