Instruction manual

incompetent persons.

• From time to time check the cord for damages. Never use the appliance if cord or appliance

shows any signs of damage.

• Only use the appliance for domestic purposes and in the way indicated in these instructions.

• Never immerse the appliance in water or any other liquid for any reason whatsoever. Never

place it into the dishwasher.

• Never use the appliance near hot surfaces.

• Should the cord be damaged, it must be replaced by a competent qualified electrician

(*)

• Before cleaning, always unplug the appliance from the power supply.

• All repairs should be made by a competent qualified electrician

(*)

• Never use the appliance outside and always place it in a dry environment.

• Never use accessories which are not recommended by the producer. They could constitute a

danger to the user and risk to damage the appliance.

• Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any

way. Do not wind the cord around the appliance and do not bend it.

• Stand the appliance on a table or flat surface.

• Make sure the appliance has cooled down before cleaning and storing it.

• Make sure the cord never comes into contact with the hot parts of the appliance.

• The temperature of the accessible surfaces may be very high when the appliance is in use.

Never touch those surfaces during use, and only handle the buttons.

• Make sure the appliance never comes into contact with inflammable materials, such as curtains,

cloth, etc… when it is in use, as a fire might occur.

• Always unplug the appliance when it is not in use, especially since it is not equipped with an

on/off switch.

• Be extremely careful, as oil or fat preparations might catch fire when overheated.

• When using the appliance under an extractor hood, make sure to observe the minimal distance

advised by the producer. It is even wiser to double this distance.

• Only use the appliance for food that is supposed to be cooked.

• Immediately unplug the appliance if a crack appears and make sure it is controlled by a

qualified competent electrician.

UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)