Instruction manual

6
INSTALLATION AND CONNECTION
• Remove all packing material and accessories. Examine the oven for any
damage such as dents or a broken door. Do not install if the oven is
damaged.
• Remove any protective lm, found on the microwave oven cabinet surface.
• Do not remove the light brown Mica cover that is attached to the oven
cavity to protect the magnetron.
• Select a level surface that provide enough open space for the intake
and/or outlet vents.
• The rear surface of appliance shall be placed against a wall. A minimum
clearance of 7.5cm is required between the oven and any adjacent
walls. One side must be open. Leave a minimum clearance of 30cm
above the oven. Do not remove the feet from the bottom of the oven.
• Blocking the intake and/or outlet openings can damage the oven.
• Place the oven as far away from radios and TV as possible. Operation of
microwave oven may cause interference to your radio or TV reception.
• Plug your oven into a standard household outlet. Be sure the voltage
and the frequency is the same as the voltage and the frequency on the
rating label.
• Do not install the oven over a stove or other heat-producing appliance.
If installed near or over a heat source, the oven could be damaged and
the warranty would be void.
OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking
parameters to meet your needs better for cooking.
1. Clock Setting
When the microwave oven is electried,the oven will display "0:00", buzzer
will ring once.
1. Press " CLOCK/PRE-SET ", the hour gure ash;
2. Turn to adjust the hour gures, the input time should be within 0--23.
3. Press " CLOCK/PRE-SET ", the minute gures will ash.
4. Turn to adjust the minute gures, the input time should be within 0--59.
5. Press " CLOCK/PRE-SET" to nish clock setting. ":" will ash.
Note:
• If the clock is not set, it would not function when powered.
• During the process of clock setting, if no oppreation in 1 minute, the
oven will go back to the previous status automatically.
2. Microwave Cooking
1. Press the "Micro./Grill/Combi. " key once, and "P100" display.
2. Press " Micro./Grill/Combi." for times or turn to select the microwave
power "P100", "P80", "P50", "P30", "P10" will display in order.
3. Press "START/+30SEC./CONFIRM " to conrm.
4. Turn to adjust the cooking time. (The time setting should be 0:05- 95:00.)
5. Press " START/+30SEC./CONFIRM " to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch are
as follow
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave Power Chart
Microwave Power 100% 80% 50% 30% 10%
Display P100 P80 P50 P30 P10
Instruction manual