Installation Manual

Installation Procedures
3-24 © 1999 Triton Network Systems, Inc. All Rights Reserved.
To test the fiber optic cable:
1 Connect the 100 Mbps Internet FSI test cable to the IFU Alpha and IFU
Beta fiber cables.
NOTE: Never connect the transmitter first.
2 Connect the optical power meter to the IFU Beta test adapter (see
Figure 3-11 and Table 3-7).
Figure 3-11. 100 Mbps Internet Fiber Optic Continuity Test Setup
Outside Building
INSIDE BUILDING
Optical
Light Source
Demarcation Box
IFU Alpha
Fiber Cable
IFU Beta
Fiber Cable
Optical
Power Meter
Plug
Connection
12
43
65
7
8
FSI Test
Cable
FSI Test
Cable
Table 3-7. IFU-to-IFU Fiber Test Connections
IFU Beta
Fiber Name
IFU Beta Test
Adapter
Connector
IFU Alpha
Test Adapter
Connector
IFU Alpha
Fiber Name
Payload RX 2 Orange 1 Blue Payload TX
Payload TX 1 Blue 2 Orange Payload RX
Interconnect RX 8 Black 7 Red Interconnect TX
Interconnect TX 7 Red 8 Black Interconnect RX