Installation Instructions

Installation and Commissioning Guide - R2.0

CAUTION: Do not block the front of the Invisible Fiber® unit to avoid possible radio service

interruption.

CAUTION: To reduce the risk of fiber optic cable damage, use the following bend radius

guidelines for indoor/outdoor fiber optic cable:

• Long-term (installed): bend radius is equal to 20 times the diameter of the cable.

• Short-term (during installation): bend radius is equal to 10 times the diameter of the cable.

Other Precautions

Failure to follow the installation procedure described in the Triton Network Systems, Inc.

product documentation may result in damage to the Invisible Fiber® unit and render the unit

unusable. If you have any questions, contact your Triton Network Systems, Inc. project liaison or

the Technical Assistance Center (TAC) at 407-903-2070.

The Invisible Fiber® unit must be installed in accordance with wall-mount or pole-mount

specifications described in the Triton Network Systems, Inc. product documentation.

This equipment is not offered for sale or lease to members of the general public and is intended

for sale to licensed commercial operators only. This equipment shall also be serviced and

professionally installed only by trained personnel.

Triton Network Systems, Inc. is not responsible for compliance with federal and local laws,

regulations, electrical codes, building codes, fire codes, and licensing agreements, except as

expressly provided herein.