User's Manual

Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service

Loading the dishwasher racks.

For best dishwashing results, follow these loading guidelines. Features and

appearance of racks and silverware baskets may vary from your model.

Upper Rack

Although the upper rack is for glasses, cups and

saucers, pots and pans can be placed in this rack

for effective cleaning. Cups and glasses fit best

along the sides. This is also a secure place for

dishwasher-safe plastics.

The cup shelf

(on some models) may be placed

in the up or down position to add flexibility.

wine glass holder

(on some models) secures wine

glasses at an angle for best washability. Because

wine glasses come in various sizes, after loading,

slowly push in the rack to make sure they will

clear the top of the dishwasher.

The upper rack is good for all kinds of odd-

shaped utensils. Saucepans, mixing bowls and

other items should be placed face down. Fold-

down fingers (on some models) provide flexibility

for extra-large and hard-to-fit items.

Secure larger dishwasher-safe plastics over two fingers

when possible.

Make sure small plastic items are secure so they can’t fall

onto the heater.

Be sure that items do not protrude through the bottom of

the rack and block rotation of the middle spray arm. This

could result in poor wash performance for items in the

upper rack.

Check to make sure that tall items will not block rotation of

the top wash arm.

The Wash Tower

Keep the center area clear in the lower rack.

The wash tower rises through the center of the

lower rack during the wash and rinse portions of

the cycle. The wash tower shoots water into the

mid-level wash arm located under the upper rack.

Blocking the wash tower could result in poor wash

performance for items in the upper rack.

Don’t block or load tall things next to the

Wash Tower.