User's Manual

Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
11
Status Lights What It Means What To Do
CLEANSENSOR Error If the sensing light doesn’t come
on
during the first part of the
NORMAL or POTS & PANS cycles,
the
CLEANSENSOR is not working.
Call for service. The dishwasher
will continue to work without the
CLEANSENSOR.
NOTE:
This light will NOT stay on
the entire cycle.
START/RESET pad has Allow up to 90 seconds for the
been pressed dishwasher to drain and reset
before selecting a new cycle.
Control Error Press the
START/RESET pad to turn
off the beeper. Turn off power at
the circuit breaker for 10 seconds,
then restore power. If the rinsing
light continues to flash, then call
for service.
Control or Sequence Press the START/RESET pad to turn
Switch Error off the beeper and the dishwasher
will attempt to reset. Then restart the
wash cycle. If this error continues
call for service.
Flashing display lights.
STATUS
SENSING
WASHING
RINSING
DRYING
SANITIZED
PLUS A
BEEPING
SOUND
STATUS
SENSING
WASHING
RINSING
DRYING
SANITIZED
STATUS
SENSING
WASHING
RINSING
DRYING
SANITIZED
STATUS
SENSING
WASHING
RINSING
DRYING
SANITIZED
PLUS A
BEEPING
SOUND