TLS Lithium Ion Cordless Screwdriver OPERATING & SAFETY INSTRUCTIONS Thank you for purchasing this Triton power tool. These instructions contain information necessary for safe and effective operation of this product. Keep this manual close to hand and ensure all users of this tool have read and fully understand them. triton.com.
SPECIFICATIONS CONTENTS Specifications Features Safety Symbols Functions Service Warranty Triton Offices 2 Contents 3 4 5 8 9 11 12 13 Model no: TLS Voltage: 3.6V Charger: 230 - 240V ~ 50Hz Charge time: 3-5 hours No load speed: 200min-1 Net weight: 300g (10.
FEATURES GENERAL SAFETY RULES 3 Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery operated (cordless) power tool. 1 SAVE THESE SAFETY INSTRUCTIONS 2 and well lit. Cluttered benches and dark areas invite accidents.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. • Dress properly. Do not wear loose clothing or jewellery. Tie back long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts. • Avoid accidental starting. Ensure the switch is in the off-position before plugging in.
SYMBOLS ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. Always wear ear, eye and respiratory protection. Double insulated. Instruction warning. Instruction note. FUNCTIONS TRIGGER SWITCH • To operate the screwdriver engage the trigger switch (1). • Release the switch to stop.
or near heat sources. • Avoid charging your screwdriver in temperatures below 0°C (32°F) and over 40°C (104°F). 1. Push the connection pin on the charger (6) into the charger connection point (4) on the base of the screwdriver handle. 2. Connect the mains plug of the charger to a suitable power point. The red LED charge light indicator (5) will illuminate for the duration of the charge cycle. 3. The charge cycle should take between 3 and 5 hours, after which the charge light indicator (5) will switch off.
TRITON OFFICES WARRANTY To register your warranty complete the registration card included in this manual and return it to your nearest Triton office (listed below). Alternatively, you can register online by visiting our web site www.triton.net.au. Your details will be included on our mailing list (unless indicated otherwise) for information on future releases. Details provided will not be made available to any third party. Triton Manufacturing & Design Co.
TAPE ALONG THIS EDGE TO SEAL TLS Warranty Registration Card Mr / Ms / Mrs Address Postcode Ph: (Private) ( ) Ph: (Business) ( ) SA ON P VE O AND STAGE T REGIS IME BY TERIN G ONL triton INE .com .au I don’t wish to be included on your mailing list.
PLEASE AFFIX STAMP TO: _______________________________ _______________________________ _______________________________ _______________________________