Quick Reference Guide User guide

5
3
1
2
4
6
STEP
ACTION
STEP
ACTION
7
5
8
REPLENISH TDM CASSETTE(S)
REMOVE REJECT CASSETTE. UNLOCK AND REMOVE
ANY
NOTES. DO NOT RECYCLE REJECT NOTES!
REMOVE NOTE CASSETTE(S). UNLOCK AND SLIDE
PACKER
PLATE TOWARDS REAR OF CASSETTE.
LOCATE THE SPRING-LOADED LOCKING PIN ON THE
UNDERSIDE
OF THE TRAY. PULL THE PIN DOWN AND
ROTATE
SWIVEL PLATFORM 180° CLOCKWISE.
UNLOCK/OPEN SECURITY DOOR. EXTEND THE DIS-
PENSER MOUNTING TRAY.
NOTE: TDM-100 HAS A FIXED TRAY ASSEMBLY.
RELEASE PIN TO LOCK IN
PLACE
.
LOCK AND REINSTALL
REJECT
CASSETTE.
PLACE CURRENCY IN THE CASSETTE AND SLOWLY
RELEASE
THE HOLD-BACK LATCH. ALLOW PLATE
TO
MOVE FORWARD.
SLIDE THE CASSETTE(S) BACK INTO THE DIS-
PENSER. PULL THE PIN DOWN AND ROTATE THE
SWIVEL
PLATFORM 180° COUNTERCLOCKWISE.
COUNT THE NUMBER OF BILLS THAT REMAIN IN
THE
CASSETTE, IF ANY.
COUNT THE NUMBER OF BILLS THAT ARE BEING
ADDED
TO THE REMAINING NOTES.
THE TOTAL NUMBER OF NOTES WILL BE THE
NUMBER
ENTERED IN THE “ENTER QTY. IN CAS-
SETTE” PROMPT.
PUSH THE DISPENSER MOUNTING TRAY (IF APPLI-
CABLE) BACK INTO THE CABINET.
LATCH IN PLACE WITH
THE
HOLD-BACK LATCH.
CLOSE AND LOCK THE
CASSETTE
.
RELEASE PIN TO LOCK
IN
PLACE.
CLOSE AND LOCK THE
SECURITY
DOOR.