Owner's manual

4-10
SECTION 4 - HANDLING CASSETTES
MULTI-CASSETTE CASH DISPENSER OPERATION MANUAL
TRITON SYSTEMS, INC.
MODELS 9640/9641/9660/9661
OPENING THE REJECT CASSETTE
1. Insert the key into the cassette lock. To unlock the cassette, apply inward pressure on the key
while turning it clockwise to the stop position (approximately a quarter-turn). Open the cas-
sette by simultaneously pressing the release button and lifting the lid. Flip the lid back fully.
2. The Reject Cassette is now open for collecting any rejected bundle notes. These will be present
in the folding tray. After retrieving any rejected bundle notes, lift the folding tray and check
underneath for any rejected single notes.
3. After removing any rejected notes, close the cassette lid. Fold the lid down to its locked posi-
tion. The release button should “pop” out, allowing the lid to mate cleanly with the body of the
cassette. Turn the key counter-clockwise to lock the cassette.
INSTALLING THE REJECT CASSETTE
Using the reverse of the steps taken to remove the Reject Cassette, slide the Reject Cassette back
into its slot in the mechanism. Make sure the cassette is fully inserted. LOCK all cassettes into
position using the Cassette Lock/Unlock function (see Section 5, Management Functions).
Figure 4-19.Opening Lid.
Figure 4-18.Key Inserted.
Figure 4-20.Bundle Reject Tray.
Figure 4-21.Single Reject Compartment.