Installation Manual Owner's manual

11
ATM INSTALLATION FOR ACCESSIBILITY
(b) Reach Depth More Than 10 inches
(255 mm). Where the reach depth to
the operable parts of any control as mea-
sured from the vertical plane perpen-
dicular to the edge of the unobstructed
clear floor space at the farthest protru-
sion of the automated teller machine or
surround is more than 10 inches (255
mm), the maximum height above the fin-
ished floor or grade shall be as follows:
(3) Forward and Parallel Approach. If
both a forward and parallel approach
are possible, operable parts of controls
shall be placed within at least one of the
reach ranges in paragraphs (1) or (2) of
this section.
SNOITACIFICEPSYTILIBISSECCA
H T P E DH C A E RTH G I E HMUM I X AM
sehcnI sretemilliM sehcnI sretemilliM
01552450731
110822/ 13 50631
21503355431
310332/ 12 55331
415532/ 11 50131
51083155921
615042/ 10 55821
71034050721
815542/ 19 45521
91584945421
020152/ 18 40321
125352/ 17 45021
22065745911
325852/ 16 40811
42016640711
EXCEPTION: Where a function can be
performed in a substantially equivalent
manner by using an alternate control,
only one of the controls needed to per-
form that function is required to comply
with this section. If the controls are iden-
tified by tactile markings, such markings
shall be provided on both controls.
4.34.4 Controls. Controls for user
activation shall comply with 4.27.4
(Operation).
4.34.5 Equipment for Persons with
Vision Impairments. Instructions and
all information for use shall be made ac-
cessible to and independently usable
by persons with vision impairments.
(20) Where automated teller ma-
chines (ATMs) are provided, each ATM
shall comply with the requirements of
4.34 (Automated Teller Machines) ex-
cept where two or more are provided at
a location, then only one must comply.
EXCEPTION: Drive-up-only automated
teller machines are not required to com-
ply with 4.27 (Controls and Operating
Mechanisms) and 4.34.3 ( Reach
Ranges).
(4) Bins. Where bins are provided for
envelopes, waste paper , or other pur -
poses, at least one of each type pro-
vided shall comply with the applicable
reach ranges in paragraph (1), (2), or (3)
of this section.