Installation Manual User guide

25
EXTERIOR WALL DIMENSIONS
The following illustrations show the nominal wall area dimensions required for
installation. Wall opening dimensions have a plus/minus (+/-) 1/4" tolerance.
The height of the opening is from exterior sidewalk level to the base of the
opening to comply with Federal ADA requirements.
gninepOllaWfosnoisnemiD
thgieHhtdiW
roiretxemorf(thgieH
)dnuorg
"8/5-92
)mm157(
"4/3-12
)mm255(
"8/1-13
)mm987(
Wall
Floor - exterior
Note
Dimensions listed comply with US Federal ADA Guidelines. For USA
installations, check for additional guidance. For non-USA installations,
check regulations relating to the country of install.
SITE PREPARATION/INSTALLATION