Installation Manual User guide

35
10. Slide the unit back until the control panel trim is flush to the exterior wall (Figure
7).
9. Temporarily mount the trim on the protruding sleeve. DO NOT secure with
screws at this time.
SITE PREPARATION/INSTALLATION
Figure 5. Control panel trim.
Figure 7. Slide unit back flush to wall.
Figure 6a. Location of clips on con-
trol panel trim.
Figure 6b. Location of slots on sleeve
control panel.
11. Adjust the plinth’s leveling feet to ensure the control panel trim is flush against
the exterior wall and the cabinet is level.