User Manual Instruction Manual

MODEL FT5000 USER MANUAL

Introduction

This chapter describes the basic operation of the terminal. The following topics are

covered:

1. Control Panel Layout. Describes the layout of the terminal’s control panel.

2. Keypad Operation. Describes the use of the alphanumeric keypads.

3. Menu-Based Operation. This section gives a general overview of the terminal

display interface.

4. Accessing Management Functions. Describes the password entry procedure

that must be followed in order to access the Management Functions area.

5. Customer Transactions. Summarizes the actions involved in typical customer

transactions. In addition, the voice-enabled transactions feature is described.

Control Panel Layout

The user interface of the terminal consists of the LCD display, receipt chute, card

reader, headphone jack (visually impaired), and 24 keys on three keypads. The

primary menu navigation keys are arranged in two four-key groups, one group on

either side of the LCD display. The main keypad consists of 10 alphanumeric keys,

two arrow keys, and four large control keys, all located in a 16-key group beneath the

LCD display.

All of the keys that a customer would use to conduct transactions have an integral

raised Braille symbol to conform to the requirements of the Americans with Disabili-

ties Act. (See Figure 2-1)

Fig. 2-1. Control panel layout

Main

Keypad

Headphone Jack Bill Tray

Receipt

Chute

Card

Reader

LCD Screen

Menu Keys