User Manual Instruction Manual

40
MODEL FT5000 USER MANUAL
Verify Operation
1. Close and lock the security cabinet.
2. Verify the cassettes are Locked and In
Service.
3. In Management Functions, select
Diagnostics, then Dispenser.
4. Select the Test Dispense option.
Select either individual cassettes
that are installed (“A”, “B”, “C”,or
“D”) or “All Cassettes ”. A prompt
appears asking how many notes to
dispense. (Figure 4-21) The Test
Dispense operation will start.
5. The Test Dispense command
instructs the dispenser to
dispense, minimum, one note from
each installed and operational
cassette into the reject vault. This
test exercises the dispenser without
sending notes to the exit.
6. After completion of the Test
Dispense, the following prompt is
displayed. (Figure 4-22) - “Test
Dispense Completed Successfully
- Dispense Count , A: (# of notes),
B: #, etc
Figure 4-21. Enter # of notes.
Figure 4-22.
**IMPORTANT**
Ensure the MULTIPLE AMOUNT pa-
rameter matches the denomination
of currency in each Note Cassette!
See the procedure for using the
MULTIPLE AMOUNT function to set
this parameter, in Section 5, Man-
agement Functions.