User Manual Instruction Manual

108
MODEL RL/FT5000
XP
USER MANUAL
ENTER MAINTENANCE
ÂÂ
ÂÂ
 SEND SUPPLY STATUS ONLY. When selected, the terminal will send an
unsolicited message, status code ‘320’, to the host when the maintenance
function is entered. This is the default selection.
ÂÂ
ÂÂ
 Send Supervisory Status Only. When selected, the terminal will send an
unsolicited message, status code ‘340’, to the host when the maintenance
function is entered.
ÂÂ
ÂÂ
 Send Supervisory/Supply Status. When selected, the terminal will send
two (2) unsolicited messages, status code ‘320’ and ‘360’, to the host
when the maintenance function is entered.
E
XIT MAINTENANCE
When the user exits maintenance, the terminal will send an unsolicited message,
status code ‘300’, to the host.
When finished configuring the general parameters, press <6> on the keypad to
save parameters and exit.
5. E
NTER/EXIT MAINTENANCE STATUS OPTIONS. The available status options
are described below. Press <5> on the keypad to toggle through the
options.
6. S
AV E GENERAL PARAMETERS/EXIT.