User Manual Instruction Manual

121

MANAGEMENT FUNCTIONS

GENERAL SETTINGS

ACCESS INSTRUCTIONS:

1. From the M

AIN MENU screen, select the TERMINAL CONFIGURATION op-

tion by pressing number <6> on the keypad.

2. From the TERMINAL CONFIGURATION screen, select the AUDIO SETUP op-

tion by pressing number <6> on the keypad.

3. From the A

UDIO SETUP screen, select the GENERAL SETTINGS option by

pressing number <1> on the keypad.

ESCRIPTION:

The G

ENERAL SETTINGS option allows the terminal operator to perform the fol-

lowing functions:

1. V

OICE ASSISTANCE. This function allows user to enable/disable voice

assistance. If disabled, the remaining selections are also disabled.

2. B

ASE VOLUME. This function allows user to set the volume as Low (default),

Medium, High, or Highest.

3. S

PEECH RATE. This function allows user to set the speech rate to Slow,

Normal (default), Fast, or Fastest.

4. V

OICE SELECTION. This function allows user to set the voice as Microsoft

Mary (default), Sam, or Mike.

5. O

RIENTATION VOICE MESSAGE. This function allows user to enable/disable

the message that is spoken when the number <5> key is pressed while the

“Welcome” screen is displayed.

6. S

AV E SETTINGS AND EXIT.