Manual

June 2004 Isis® Sonar User's Manual, Volume 2 129
4. After you click
OK to acknowledge the message (you can also put a check mark
in the
Don’t show me this warning again box before you click OK), Isis
displays the Sidescan Sonar Information dialog box (Figure 4-3 in the
Isis User’s
Manual, Volume 1
).
5. From the available fields in this dialog box, choose channels, frequencies, beam
angles, beam width, etc., as you would for any other sonar; then click OK.
Note: If you chose the DCI version of DF-1000 (from the Select Sonar dialog box),
the
Automatically start Control Program box is already checked for you in the
Sonar Information dialog box. This is the only way this sonar can operate with Isis.
Isis then displays the EdgeTech DF-1000 DCI Control dialog box (Figure I-2) after
you click
OK in the Sidescan Sonar Information dialog box.
Figure I-2. EdgeTech DF-1000 DCI Control dialog box
Appendix I: Working with Specific Sonars