Manual

Safety Precautions

Please adhere to the hardware and software precautions

mentioned below. In addition, observe all safety precautions

mentioned in this manual.

When working with the overall system

1. Before handling components inside your computer system, exit all

applications and shut down the operating system in accordance with

procedures applicable to them.

2. Turn off the power to the computer and disconnect all cables that may be

feeding electrical power to the system you will be working on.

3. Wear a grounded, anti-static wrist-strap. This is especially important if

you are removing, replacing, or installing a printed circuit board of any

kind.

Failure to adhere to these and other safety precautions mentioned in the manual

could result in harm to property or personnel!

When working with magneto-optical cartridge disks

• Please refer to the Appendix entitled “Mass Storage Options” for

important details covering the handling of M-O disks!

• Never boot your system with a writable M-O cartridge inserted into the

drive!

• Use magneto-optical media that has 512 bytes per sector, not 1024

bytes per sector, and use the AFDisk software utility to format

magneto-optical media. Never use Windows 95 to format M-O media!

Triton Elics Internatonal

125 Westridge Drive

Watsonville, CA 95076

USA

U.S.A.