Manual

June 2004 Isis® Sonar User's Manual, Volume 2
38
D.3 Template Construction
For each com port and its associated serial device that will be communicating
with Isis, you can use a ready-made template or create your own to be used as
the interface.
To select or create a template in Isis
1. From the File menu, select Record Setup, then Serial Ports.
2. Choose a com port to be used with a given serial device you have
in mind.
3. Enable status by clicking in the Status box. A check mark will be
visible in the On box when status is enabled.
4. Either:
• Refer to the buttons displaying ready-made “server” software
types (NMEA0183, TSS, Seatex MRU, SeaBat #1, SeaBat #2),
choose one to be your template, and choose OK
.
or
• Create your own in the Navigation/Telemetry text box provided
and choose OK. (A sample user-defined template appears in
Figure D-1.)
Appendix D: Serial Interfaces