Manual

June 2004 Isis® Sonar User's Manual, Volume 2
58
START_LOGGING
{filename}
Causes Isis to start logging sonar data in record
mode. Record mode must have already been started
in DISPLAY ONLY mode. When START_LOGGING
is followed by a fully qualified path and file name, Isis
uses that name for saving. Otherwise, Isis generates
its own file name.
START_PLOTTING
Causes Isis to turn on the plotter. The plotter must
have been already specified in the File/Print dialog
box. NMEAO0183 recognizes this too.
STOP_LOGGING
Causes Isis to stop logging and return to DISPLAY
ONLY mode; Record Mode only.
STOP_PLOTTING
Causes Isis to turn off plotting.
STOP_PROGRAM
If Isis is in Record Mode, sending this string to Isis
will cause Isis to stop recording and then exit. This
string is applicable to Windows 95, Windows NT,
Windows 2000 or XP operating systems.
STOP_PROGRAM_
SHUTDOWN
If you are running Isis in Record Mode in a
Windows NT environment, sending this string to Isis
will cause Isis to stop recording, exit, and then power
down the computer, if the computer has auto-
shutdown capability. This string is applicable to Isis
running on a Windows NT, 2000, or XP operating
system.
D.6 Transmit Data Format
When a target is logged during an Isis session, pertinent target data can be
automatically transmitted out the com port on which the navigation data are
being received.
To transmit the data format
1. Set up the com port with the token {CONOUT} to the end of string
out of which you want the contact information to go to.
2. Mark the contact by logging a target in Isis (double-click in imagery).
3. Save the contact (press F9).
Appendix D: Serial Interfaces