Manual

June 2004 Isis® Sonar User's Manual, Volume 2 63
Recall
(INSERT)
Opens and redisplays the saved images of contacts and
targets along with the information associated with the
features. Keyboard shortcut:
[INSERT]. Contacts and
targets are stored as individual files with the file extensions
CON and TGT respectively. The features are specified by
their assigned numbers (identifiers), which are also the
contacts’ file names.
Find
(F5)
Displays a dialog box used for finding contacts and targets.
See Figure E-2 and Table E-2. Keyboard shortcut:
[F5].
Find Next
(Shift+F5)
Tells Target to get the next target or contact that meets the
most recently defined criteria without summoning the Find
dialog box (Figure E-2 on page 74).
Save
(F9)
After a contact is logged, you can save it to a file on an
optical or hard disk using the
Save command. If the contact
has been measured, annotated and / or classified, this
information will also be stored with the logged image.
When you choose
Save, the currently selected contact
image and information are saved to a file named with the
contact number that has been specified using the Set
Contact Number command in the Edit menu. The file is
saved in the working directory, and the file name extension
is either
CON or TGT, depending on the contact rank as
specified with the Classify command in the Edit menu. The
default file name extension is CON.
If the mensuration, annotation and / or classification of a
saved contact is modified, the
Save command will cause
the old contact information to be overwritten with the new
information. Keyboard shortcut: [F9].
Appendix E: Using the Target Utility