Manual

June 2004 Isis® Sonar User's Manual, Volume 2 71
3. Make your selections by checking or unchecking boxes next to the
descriptors and click
OK.
The information for the currently open contact(s) is appended to
REPORT.TXT in Target’s current working directory.
Note: Recall that, prior to using
Print ASCII Report, you can specify a
different work directory for Target by choosing
File→Set Working
Directory
, and then typing the fully qualified directory path. Refer to ‘Set
Working Directory… ’.
To create and view the report.txt file in Target
1. Display targets or contacts in the Target working window.
2. From Target’s main menu choose
File → Print ASCII Report.
3. As was the case with the procedure called “x” make your selections
by checking or unchecking boxes next to the descriptors.
4. Click
Generate Report.
5. The system creates
REPORT.TXT; the previously unavailable
(grayed-out)
View Report File button becomes available.
6. Click
View Report File.
The system opens
REPORT.TXT in Notepad, where you can observe the
data (an example of the data layout is shown in Figure E-3).
E.3 Target’s Edit Menu
You use Target’s Edit menu to do any of these tasks:
• Copy an image to the Clipboard
• Annotate a contact image
• Classify a contact
• Specify the units to use when reporting metrics associated with the file
• Specify whether a mensuration line that is about to be drawn shall be a
width, length, or shadow
• Set certain constants
Appendix E: Using the Target Utility