Manual

June 2004 Isis® Sonar User's Manual, Volume 2 76
Target’s main menu). The value 0 means off.
E.4 Contact Logging
Contacts are logged from within Isis by double-clicking with the left trackball
button on an image of the contact as viewed in a waterfall window. A full-
resolution image of the contact along with critical geocoding information is
transferred to the Target utility where you can save it, with or without measuring it
first. (See ‘Contact Mensuration’ and ‘Save (F9)’.)
You can define the size of the transferred image through the
Target Setup
command in the Tools menu of Isis. Ranges are 64 by 64 pixels, up to 2048 by
2048 pixels. The default size is 256 by 256 pixels.
E.4.1 Contact Information
When a contact is transferred to Target, a Contact Information window is
displayed. Some of this information is transferred directly from Isis, and
some is calculated within Target. Figure E-7 shows a typical Contact
Information window with a contact’s statistics:
Figure E-7. Contact Information window for a sample contact
Appendix E: Using the Target Utility