Manual

June 2004 Isis® Sonar User's Manual, Volume 2 82
You preview your enhancements in Enhance before applying your changes to
your Target contact image.
If an image does not have Tag 270 information, you still will be able to load the
image into Enhance, but you will not be able to mensurate the image.
To use Target’s Enhance function
1. Load a TIFF image into Target (
File →Recall or press [Insert]).
The system displays a dialog box where you can type a file name. You
can also browse for the TIFF file by clicking
Display Menu in this dialog
box. The system displays the TIFF image and an Information window
with data pertaining to the image.
2. From Target’s main menu select
Enhance.
The system displays the Enhance dialog box. Figure E-9 shows a typical
Enhance dialog box with four enhancements applied to a thumbnail of an
image loaded into Target. If your thumbnail enhancements display the
effect you seek, you can then apply your thumbnail enhancements to the
larger file you loaded in step 1.
Appendix E: Using the Target Utility