Quick Reference Guide

10
COMBINATION LOCKS
INTRODUCTION
THE SECURITY CABINET CAN BE SECURED USING AN ELECTRONIC COMBINATION LOCK. THESE
PAGES
COVER HOW TO OPERATE THE COMBINATION OF EITHER ELECTRONIC LOCK OFFERED.
ENTERING THE COMBINATION
1. ENTER THE PRESET COMBINATION AND CHECK FOR PROPER OPERATION. AFTER EACH KEYPRESS, THE LOCK WILL BEEP. AFTER THE
FINAL
DIGIT HAS BEEN ENTERED, THE LOCK WILL BEEP TWICE, AND THE OPEN PERIOD WILL BEGIN.
2. WHEN A VALID COMBINATION HAS BEEN ENTERED, THE OPERATOR WILL HAVE APPROXIMATELY 4 SECONDS TO OPEN THE LOCK.
3. TO OPEN THE LOCK, TURN THE DIAL CLOCKWISE.
4. A
FTER THE LOCK IS OPENED, THE CABINET DOOR MAY BE OPENED.
LOCKOUT FEATURE
THE LOCK INCLUDES A ‘WRONG TRY PENALTY’ LOCKOUT FEATURE THAT PREVENTS ENTRY FROM UNAUTHORIZED PERSONNEL. THIS
FEATURE
PERFORMS AS FOLLOWS:
•ENTRY OF FOUR (4) CONSECUTIVE INVALID COMBINATIONS STARTS A 5-MINUTE DELAY PERIOD.
- LED FLASHES RED AT TEN (10) SECOND INTERVALS.
•AT THE END OF THE DELAY PERIOD, TWO (2) MORE CONSECUTIVE INVALID COMBINATIONS WILL RESTART AN ADDITIONAL 5-MINUTE
DELAY
.
EACH LOCK IS SHIPPED FROM THE FACTORY IN SHELVED MODE, OPERATING ON A STANDARD COMBINATION (50-25-50).
ENTERING THE COMBINATION
1. TURN THE DIAL LEFT (CCW) UNTIL THE LETTERS “EC” (ENTER COMBINATION) APPEAR
ON
THE LCD.
2. ENTER THE FACTORY COMBINATION OF 50-25-50 BY SEQUENTIALLY PRESSING THOSE SIX
(6) BUTTONS. THE LCD WILL DISPLAY THESE NUMBERS AS THEY ARE ENTERED.
3. WHEN THE COMBINATION HAS BEEN CORRECTLY ENTERED, THE LCD WILL READ “OPR”,
MEANING “OPEN RIGHT”. TURN THE DIAL RIGHT (CW) UNTIL IT STOPS. THE LOCKS
BOLT
IS NOW RETRACTED AND THE LOCK IS OPEN.
4. AFTER THE LOCK IS OPENED, THE CABINET DOOR MAY BE OPENED.
OPERATING THE ELECTRONIC LOCK
THE ELECTRONIC LOCK COMBINATION CONSISTS OF SIX DIGITS. UPON ARRIVAL, THE COMBINA-
TION OF THE LOCK SHOULD ALREADY BE PRESET TO 1-2-3-4-5-6.