Quick Reference Guide

11
11. CNF - ENTER NEW COMBINATION - POC
ENTER NEW COMBINATION AGAIN TO CONFIRM. POC (PULL OUT CHANGE KEY) WILLBE DISPLAYED.
12. POC - REMOVE CHANGE KEY - EOP
REMOVE THE CHANGE KEY. EOP (END OPERATION) IS DISPLAYED.
13. EOP - P
OWER LOCK - EC
TURN THE DIAL TO THE LEFT (CCW) UNTIL EC (ENTER COMBINATION) IS DISPLAYED.
14. EC - ENTER NEW SHELVED MODE COMBINATION - OPR
ENTER THE NEW SHELVED MODE COMBINATION BY PRESSING THOSE DIGITS ON THE LOCK’S KEYPAD. THE NUMBERS WILL BE DISPLAYED
ON
THE LCD AS THEY ARE ENTERED.
15. OPR - RETRACT BOLT
TURN THE DIAL TO THE RIGHT (CW) TO RETRACT THE BOLT.
16. CLOSE DOOR
17. EXTEND BOLT
TURN THE DIAL TO THE LEFT (CCW) TO EXTEND THE BOLT.
10. E
NF - ENTER NEW COMBINATION - CNF
SELECT AND ENTER THE NEW COMBINATION. “CNF” (CONFIRM NEW FACTORY COMBINATION) WILL BE DISPLAYED.
TO CHANGE THE COMBINATION:
1. POWER LOCK - EC
TURN THE DIAL TO THE LEFT (CCW) UNTIL “EC” (ENTER COMBINATION) IS DISPLAYED.
2. EC - ENTER SHELVED MODE COMBINATION - OPR
ENTER THE CURRENT COMBINATION (EITHER 50-25-50 OR A CHANGED COMBINATION) BY SEQUENTIALLY PRESSING THOSE DIGITS ON
THE
LOCK KEYPAD. THE NUMBERS WILL BE DISPLAYED ON THE LCD AS THEY ARE ENTERED.
3. OP
R - RETRACT BOLT
TURN THE DIAL TO THE RIGHT (CW) TO RETRACT THE BOLT
4. OPEN DOOR
5. INSERT CHANGE KEY
INSERT THE CHANGE KEY INTO THE CHANGE KEY SOCKET ON THE BACK OF THE LOCK.
6. EXTEND BOLT
TURN THE DIAL TO THE LEFT (CCW) TO EXTEND THE BOLT. DO NOT CLOSE THE DOOR
7. POWER LOCK - EC
TURN THE DIAL TO THE LEFT (CCW) UNTIL EC (THE CHANGE KEY SYMBOL ALONG WITH ENTER COMBINATION) IS DISPLAYED.
8. EC - PRESS #8 - ECF
PRESS THE “#” BUTTON FOLLOWED BY THE “8” BUTTON. ECF (ENTER COMBINATION,FACTORY) WILL BE DISPLAYED.
9. E
CF - ENTER CURRENT SHELVED MODE COMBINATION - ENF
ENTER THE CURRENT SHELVED MODE COMBINATION, “ENF” (ENTER NEW FACTORY COMBINATION) WILL BE DISPLAYED