Quick Reference Guide

4
CASSETTE CLOSE FUNCTIONS
FOLLOW A CCESS INSTRUCTIONS TO ENTER MANAGEMENT FUNCTIONS. SELECT TERMINAL CLOSE FUNCTIONS.
SELECT CASSETTE CLOSE.
 SELECT CASSETTE(S) TO CLOSE. A CHECK MARK (
√√
√√
√ ) IDEN-
TIFIES WHICH CASSETTE(S) ARE SELECTED. PRESS <ENTER>.
N
OTE: IF AN NMD-50 DISPENSER IS INSTALLED, WAIT FOR THE
CASSETTES
TO UNLOCK (THIS IS DONE AUTOMATICALLY).
 REMOVE AND REPLENISH THE SELECTED CASSETTE(S).
PROCEDURES FOR SPECIFIC DISPENSING MECHANISMS CAS-
SETTE REPLENISHMENT ARE ON THE FOLLOWING PAGES.
 PLACE SELECTED CASSETTE(S) IN SERVICE. PRESS <EN-
TER>. NOTE: SINGLE CASSETTE DISPENSERS (TDM-100/150,
SDD) AUTOMATICALLY “IN-SERVICE”. THE NMD-50 CASSETTES
MUST BE LOCKED AND IN SERVICE FOR NORMAL OPERATION.
N
OTE: IF AN NMD-50 DISPENSER IS INSTALLED, WAIT FOR THE
CASSETTES
TO LOCK (THIS IS DONE AUTOMATICALLY). PRESS
<ENTER> IF APPLICABLE.
 ENTER CASSETTE QUANTITY (NUMBER OF NOTES, NOT
VALUE) FOR THE SELECTED CASSETTE(S). PRESS <ENTER> TO AC-
CEPT ENTRY. REPEAT FOR EACH SELECTED CASSETTE.
 A CLOSE REPORT IS DISPLAYED TO BE PRINTED OR SAVED.
T
HIS OPERATION WILL RESET THE NUMBER OF BILLS IN THE
CASSETTE
(S) TO ZERO (0). PRESS <ENTER>.
 AFTER CASSETTE(S) HAVE BEEN REINSERTED IN THE DISPENSER,
PRESS <ENTER>.
 A TRIAL CASSETTE CLOSE REPORT AUTOMATICALLY
IS
DISPLAYED TO BE PRINTED OR SAVED. PRINT AND RETAIN A
COPY
FOR STARTING POINT REFERENCE. PRESS <ENTER> TO RE-
TURN TO CLOSE FUNCTIONS.