Quick Reference Guide

5
REMOVE THE NOTE CASSETTE. UNLOCK AND MOVE PACKER
PLATE
TO REAR OF THE CASSETTE. LATCH IN PLACE WITH
THE
HOLD-BACK LATCH.
L
OCATE THE SPRING-LOADED LOCKING PIN ON UNDER-
SIDE OF TRAY. PULL PIN DOWN AND ROTATE SWIVEL
PLATFORM
180° CLOCKWISE. RELEASE PIN TO LOCK IN
PLACE
.
3
1
2
4
6
STEP
ACTION
5
UNLOCK/OPEN DISPENSER SECURITY DOOR. (FOR TDM-
150) RELEASE THE SLIDE LOCKING LEVER AND EXTEND
STEP ACTION
NOTE: TDM-150 IS ON A SLIDING MOUNTING TRAY.
TDM-100
IS ON A STATIONARY TRAY.
COUNT THE NUMBER OF BILLS THAT REMAIN IN THE CAS-
SETTE, IF ANY.
COUNT THE NUMBER OF BILLS THAT ARE BEING ADDED TO
THE
REMAINING NOTES.
THE TOTAL OF THESE AMOUNTS WILL BE ENTERED IN
THE
“ENTER CASSETTE QUANTITY” PROMPT FOR CAS-
SETTE CLOSE PROCEDURE.
REPLENISH TDM CASSETTE
(TDM-100, -150)
REMOVE REJECT CASSETTE. UNLOCK AND REMOVE ANY
NOTES
. DO NOT RECYCLE REJECTED NOTES!
CLOSE AND LOCK REJECT CLOSE AND REINSTALL IN DIS-
PENSER.
P
LACE CURRENCY IN THE CAS-
SETTE AND SLOWLY RELEASE THE
HOLD
-BACK LATCH ALLOWING
THE
PACKER PLATE TO MOVE
FORWARD
AGAINST THE NOTES.
SLIDE THE CASSETTE BACK INTO THE DISPENSER.
PULL THE LOCKING PIN DOWN AND ROTATE SWIVEL PLAT-
FORM 180° COUNTERCLOCKWISE. RELEASE PIN TO LOCK
IN
PLACE.
THE DISPENSER MOUNTING
TRAY
FULLY.
(FOR TDM-150) R E-
LEASE THE SLIDE LOCKING
LEVER
AND SLIDE DIS-
PENSER TRAY FULLY IN THE
CABINET
.