Quick Reference Guide

6
UNLOCK/OPEN DISPENSER
SECURITY
DOOR. RELEASE
THE
SLIDE LOCKING LEVER
AND
EXTEND THE DISPENSER
MOUNTING
TRAY FULLY.
REMOVE REJECT CASSETTE.
UNLOCK AND REMOVE ANY
NOTES
. DO NOT RE-
CYCLE REJECTED NOTES!
CLOSE AND LOCK REJECT
CLOSE
AND REINSTALL IN
DISPENSER
.
3
1
2
6
STEP
ACTION
5
PLACE CURRENCY IN THE CAS-
SETTE AND SLOWLY RELEASE THE
HOLD
-BACK LATCH ALLOWING
THE
PACKER PLATE TO MOVE
FORWARD
AGAINST THE NOTES.
REPLENISH TDM CASSETTE(S)
(TDM-200, -250)
LOCATE THE SPRING-
LOADED LOCKING PIN ON
UNDERSIDE
OF TRAY. PULL
PIN
DOWN AND ROTATE
SWIVEL
PLATFORM 180°
CLOCKWISE. RELEASE PIN
TO
LOCK IN PLACE.
STEP
ACTION
REMOVE THE NOTE
CASSETTE
(S). UNLOCK AND
MOVE
PACKER PLATE TO
REAR
OF THE CASSETTE.
LATCH IN PLACE WITH THE
HOLD
-BACK LATCH.
Reject cassette
Note cassettes
4
COUNT THE NUMBER OF BILLS THAT REMAIN IN THE CAS-
SETTE, IF ANY.
COUNT THE NUMBER OF BILLS THAT ARE BEING ADDED TO
THE
REMAINING NOTES.
THE TOTAL OF THESE AMOUNTS WILL BE ENTERED IN
THE
“ENTER CASSETTE QUANTITY” PROMPT FOR CAS-
SETTE CLOSE PROCEDURE.
SLIDE THE CASSETTE BACK INTO THE DISPENSER.
PULL THE LOCKING PIN DOWN AND ROTATE SWIVEL PLAT-
FORM 180° COUNTERCLOCKWISE. RELEASE PIN TO LOCK IN
PLACE
.
RELEASE THE SLIDE LOCKING LEVER AND SLIDE DISPENSER
TRAY
FULLY IN THE CABINET.