Quick Reference Guide

9
14
2
5
3
6
STEP
ACTION
REPLENISH RECEIPT PAPER
STEP
ACTION
PULL RELEASE
PIN
AND ROTATE
PRINTER
/ CUT-
TER ASSEMBLY
DOWN
.
INSTALL NEW PA-
PER ROLL/ SPINDLE
IN
BRACKET.
PAPER FEEDS
FROM
TOP OF
ROLL
!
FEED END OF PAPER INTO PRINTER TAKE-UP SLOT.
PAPER FEEDS OVER THE BAR! PRINTER WILL
AUTOMATICALLY
GRIP AND PULL PAPER INTO
FEED
PATH.
NOTE: THIS PROCEDURE REQUIRES TERMINAL IS POWERED UP.
REMOVE SPENT
PAPER
ROLL AND
SPINDLE
FORM PA-
PER BRACKET.
OPEN CONTROL PANEL. IF PAPER REMAINS ON
ROLL
, CUT OR TEAR PAPER BETWEEN ROLL AND
PRINTER
.
RELEASE (OPEN) THE BLUE TENSION LEVER SHOWN.
REMOVE ANY PAPER FROM THE PRINTER/CUTTER
ASSEMBLY
.
Open
Closed
MOVE THE TENSION
LEVER
BACK TO THE
CLOSED POSITION.
ROTATE UP THE
PRINTER
/CUTTER AS-
SEMBLY.
RECOMMEND PERFORM A DIAGNOSTIC TEST OF
THE
PRINTER. GO TO MAIN MENU > DIAG-
NOSTICS > PRINTER > RESET/TEST
PRINTER. T HIS FUNCTION RE-INITIALIZES
AND
PERFORMS AN OPERATIONAL TEST OF THE
PRINTER
.