User Manual Owner's manual

16
MODEL RL5000 (X2) USER MANUAL
INTRODUCTION
The purpose of this section of the manual is to describe the procedures for cassette closing and replenish-
ment. Information concerning note handling and quality issues are explained where appropriate.
DISPENSING MECHANISM
The dispensing mechanism delivers the appropriate number of notes from the note cassette to fulfill the
customer’s withdrawal request. The purpose of the reject area or cassette is to accept and hold notes that
have been transferred from the note cassette but not dispensed.
**CAUTION**
DO NOT RECYCLE REJECTED NOTES INTO A CASSETTE!
Doing so could cause more rejects and/or currency jams.
Some situations that could cause the mechanism to reject notes are:
(1) Multiple notes stuck together (2) Note width too short or long.
Other conditions that could cause a reject are described in the next section, Note Condition.
* PLEASE READ *
Starting approximately Apr, 08’ , the Model RL5000 will only offer (production units) the following
dispensing mechanisms - SDD, TDM-250, and NMD-50. Units previously also offered TDM-100, -150,
and -200s.
Currency capacity depends upon the dispenser mechanism installed in the ATM, but is also affected by
note quality and thickness. Typical capacities are provided in the following table:
SMSINAHCEMGNISNEPSID0005LR
RESNEPSIDETTESSAC
DEDNEMMOCER
YTICAPACMUMIXAM
ETONDETCEJER
YTICAPAC
052-MDTelpitluM)ettessacrep(setoN0031001
DDSelgniSsetoN008105
05-DMNelpitluM)ettessacrep(setoN0581002