User Manual Owner's manual

MODEL RL5000 (X2) SERIES USER MANUAL

This section of the manual covers preventive and corrective maintenance procedures appropriate for user

personnel. The following areas are covered:

INTRODUCTION

1. REPLENISHING RECEIPT PAPER. Describes how to replace a

spent receipt paper roll.

2. CLEANING THE ENCLOSURE. The proper way to clean the ATM

housing.

3. CARD READER CLEANING. The recommended card reader

cleaning technique.

*Important*

Only qualified service personnel

are authorized to repair or ser-

vice the terminal. Should a mal-

function occur, DO NOT attempt

to service the unit yourself! Con-

tact your Triton certified service

provider!

NOTE: This operation must be completed with the AC power

applied to the ATM.

1. Open the control panel by unlocking the top enclosure

and pulling the hinged door forward.

2. If paper remains on the roll, cut or tear the paper between

the roll and the printer.

3. Remove the existing paper and spindle from the paper

bracket.

REPLENISHING THE RECEIPT PAPER

Cut paper between roll and paper path Paper roll/spindle removed.