User Manual Owner's manual

GENERAL MAINTENANCE

4. Pull the pin located on the right side of the printer bracket shown. Rotate the printer/cutter assembly

towards the front of the control panel.

5. Release (OPEN) the blue tension lever located on the left side. Remove any paper from the printer/

cutter assembly. Move the tension lever back to the CLOSED position (blue lever facing towards the

right). Close the printer/cutter assembly by rotating up and pin secures.

Open

Closed

Pull release pin.

Rotate printer/cutter assembly down.

Tension lever.

Release pin

** CAUTION **

DO NOT pull receipt paper backwards through the

printer with the tension rollers closed!

This may leave paper fragments that can cause pa-

per jams.