Use and Care Manual
13
GB
If a problem cannot be resolved using the above advice do not tamper with the saw - visit www.tritontools.com to
find your nearest Triton office for assistance.
** Visit www.tritontools.com to find your nearest authorised service centre.
Troubleshooting / Guarantee
Heavy sparking occurs inside
motor housing
Brushes not moving freely Disconnect power, remove brushes, clean
or replace
Armature short circuited
or open circuited
Use authorised service centre**
to repair or replace
Commutator surface not clean Use authorised service centre**
to repair or replace
Retractable guard will not
close, or is slow to close
Return spring detached
or broken
Re-attach or replace spring
(use only genuine Triton replacement parts)
Guard is bent Straighten it or contact authorised service
centre** to repair or replace
Mechanism fouled
by sawdust
Clean and lightly lubricate fouled mechanism
Saw depth adjustment not
holding
Depth adjustment lever requires
tightening
Reposition the depth adjustment lever as
described in 'Adjusting the Cutting Depth'
Triton Precision Power Tools guarantees to the
purchaser of this product that if any part proves to be
defective due to faulty materials or workmanship within
3 YEARS from the date of original purchase, Triton will
repair, or at its discretion replace, the faulty part free of
charge.
This guarantee does not apply to commercial use nor
does it extend to normal wear and tear or damage as a
result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights
To register your guarantee visit our web site at
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless
indicated otherwise) for information on future releases.
Details provided will not be made available to any third party.
PURCHASE RECORD
Date of Purchase: ___ / ___ / ____
Model: TA184CSL
Serial Number: __________________
Retain your receipt as proof of purchase
WARRANTY
330130_Z1MANPRO_US.indd 13 08/01/2015 12:25