Operation Manual

[11]
Connect to Xbox 360
Remove protective caps from the optical cable.
Plug one end of the optical cable into the rear of the gaming console.
Plug the other end of the optical cable into the Decoder Box.
Connect Power Adapter to Decoder Box. Plug Power Adapter into wall
outlet.
Plug the headset connector into the Decoder Box.
Be sure to connect the Xbox LIVE communication cable in the proper order:
1. Connect Xbox LIVE cable into Xbox LIVE port on the in-line controller.
2. Connect puck side of Xbox LIVE cable
into Xbox 360-compatible controller.
Power ON the gaming console and the Decoder Box.
In the Xbox Dashboard, select System Settings > Console Settings > Audio
> Digital Output and select “Dolby Digital 5.1.” Watch to ensure that the
“Dolby Digital” light on the audio controller illuminates as a game or movie
starts. To confirm Xbox LIVE settings, press the “Xbox Guide Button”
when a game is loaded, and go to Personal Settings > Voice. Ensure that
“Headset Only” is selected.