Operation Manual

[7]
Digital Decoder Box
1 2
3 4 5 6 7 8
NOTE: When Dolby Pro Logic II
is “ON” with an audio source
that is 2-channel, the audio will
then be converted to 5.1-channel
sound. When Dolby Pro Logic II
is “OFF” with an audio source
that is 2-channel, the audio will
remain 2-channel stereo. When
the source signal is Dolby 5.1, Pro
Logic II is automatically disabled.
6
DRC Dynamic Range Control: Press
to toggle dynamic range control
ON/OFF. LED will illuminate when
DRC is active.
7
5.1 Dolby Digital LED
8
Headset Outputs
1
Power Button
2
Game Volume Control
3
Time Delay Zone Selector:
Toggle to change the time delay
selections between the front and
center channels to the front and
rear channels.
(OFF = Center, ON = Rear)
4
Time Delay Button: Enables time
delay adjustment mode. Reverts
back to volume mode after 4
seconds or if pressed again.
5
Pro Logic II button: This will
toggle Pro Logic II ON or OFF. LED
will illuminate when Pro Logic II
is active.