Operation Manual

6-33
Operation Panel
KPDL Error Rpt. (Printing KPDL errors)
The printer can print error descriptions when printing error occurs during KPDL emulation. The default is On — the printer
does not print KPDL errors.
1 In the Print Settings menu, press  or  to select Emulation
Set..
2 Press [OK]. The Emulation menu screen appears.
3 Press  or  to select KPDL Error Rpt..
4 Press [OK]. The KPDL Error Rpt. screen appears.
5 Press  or  to select whether error reports are printed.
6 Press [OK]. The error report print setting is set and the Print Settings
menu reappears.
Alt. Emulation (Alternative Emulation for KPDL Emulation)
KPDL is Kyocera’s implementation of the PostScript language. The KPDL (AUTO) emulation enables the printer to
automatically change the emulation mode according to the data received when printing.
In addition to KPDL (AUTO) emulation, you can use the operation panel to set another emulation mode that is used very
often. The default setting is PCL 6.
1 In the Print Settings menu, press  or  to select Emulation.
2 Press [OK]. The Emulation menu screen appears.
3 Press  or  to select Alt. Emulation.
IMPORTANT This setting only appears when KPDL or KPDL(Auto) is selected for the emulation.
Emulation: a b
********************-
2 KPDL Error Rpt.
3 Alt. Emulation
[ Exit ]
1 Emulation Set.
KPDL Error Rpt.: a b
********************-
2 On
1 *Off
IMPORTANT This setting only appears when KPDL(Auto) is selected for the emulation.
Emulation: a b
********************-
2 KPDL Error Rpt.
3 Alt. Emulation
[ Exit ]
1 Emulation Set.