Operation Manual

Using the Operator Panel
ADVANCED OPERATION GUIDE 2-87
Color Registration
When using the printer for the first time after set-up or after having moved
it, or if printout of any color (cyan, magenta or yellow) is skewed, use this
mode to correct the color registration on the operator panel.
1
Press [MENU].
2
Press U or V repeatedly until Others >
appears.
3
Press Z.
4
Press U or V repeatedly until >Color
Registration > appears.
5
Press Z.
6
Press U or V repeatedly until >>Print
Regist Chart appears.
7
Press [OK] ([ENTER]). A question mark (?)
appears.
8
Press [OK] ([ENTER]). Processing appears and a color registration
correction chart is printed out. There are left (L), horizontal (H) and right (R)
registration charts for each color (cyan, magenta and yellow) included on
the color registration correction chart.
Others >
>Color >
Registration
>>Print
Regist Chart
>>Print
Regist Chart ?