Operation Manual

Using the Operation Panel
2-2
General Information
This chapter provides the information you need to configure the Ecosys printer. In general you need
to use the operation panel only to make default settings. You can make most changes to the printer
settings using the printer driver through the application software.
NOTE: Changes to printer settings made using a software application override changes made using
the operation panel.
You can also rely on other printer utilities such as KM-NET for Clients if you need to change settings
that are not available on the printer driver. It will allow remote access to printer settings. Printer
utilities are supplied in the CD-ROM supplied with the printer.
The chapter describes the operation panel in detail, including its menus and the procedures for
changing various printer settings.