Operation Manual

Using the Operation Panel
2-66
Automatic Form Feed Timeout Setting
If the printer receives no data for a certain period, it will time out and release the current interface. It
prints whatever data it has in its buffer and feeds out the page. The default form feed timeout time is
30 seconds.
1
Press [Menu].
2
Press  or  repeatedly until Others > appears.
3
Press .
4
Press  or  repeatedly until >Form Feed Time Out appears.
5
To change the timeout time, press [OK]. A blinking cursor (_)
appears.
6
Press  or  to increase or decrease the value at the blinking cursor and set the desired time. The
timeout time can be between 0 and 495 seconds, in 5-second increments. Use  and  to move
the cursor right and left.
7
When the desired timeout time is displayed, press [OK].
8
To exit the menu selection, press [Menu].
Setting the Sleep Timer
The printer has a sleep timer that is used to conserve power when the printer is not printing,
processing, or receiving data.
1
Press [Menu].
2
Press  or  repeatedly until Others > appears.
3
Press .
4
Press  or  repeatedly until >Sleep Timer > appears.
5
Press  and display >>Auto Sleep.
Others >
>Form Feed
Time Out 030sec.
>Form Feed
Time Out 030
sec.
Others >
>Sleep Timer >
015 min.
>>Auto Sleep
On