Operation Manual

Maintenance 4-3
Replacing the Toner Container
This section explains how to replace the toner container.
1 Open the top cover.
2 Turn the lock lever to the unlock position. Push the lock lever to the
position marked by the arrow and pull out the toner container.
CAUTION Do not attempt to incinerate the Toner
Container. Dangerous sparks may cause burns.
IMPORTANT During toner container replacement, temporarily move
storage media and computer supplies (such as floppy disks) away
from the toner container. This is to avoid damaging media by the
magnetism of toner.
IMPORTANT TA Triumph-Adler is not liable against any
damages or problems arising from the use of toner containers other
than those designated as original TA Triumph-Adler toner contain
ers.
For optimum performance, it is also recommended to use only the
TA Triumph-Adler toner containers which are specifically intended for use
in your country or region. If the toner container for another destinations
is installed, the printer will stop printing.
Note You do not have to turn printer power off before starting
the replacement. Any data that may be processing in the printer
will be deleted if you turn the printer power off
.
Note Put the old toner container in the plastic bag (supplied
with the new toner kit) and discard it later according to the local
code or regulations for waste disposal.