35-7120-2 GOLF DISC TARGET WITH 3-DISC SET INSTRUCTION MANUAL PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE If you have any concerns with your product please visit our website www.escaladesports.com for fastest service. Please have a copy of your receipt of purchase. For any technical support or warranty issues please contact Escalade Sports at 1-800-426-1421 or e-mail us at customerservice@escaladesports.
Limited 90-Day Escalade Sports Warranty All Escalade Sports games have a limited 90-day from date of purchase warranty. This warrants the retail purchaser for any Escalade Sports game purchased to be free from any defect in materials and construction for 90 days from the date of purchase. The only exceptions to the warranty include main frames, tabletops, playing surfaces, batteries or tools.
Parts List 1 2 Target Base 1 pc 4 3 Basket Pole 1 pc 5 6 Flag Pole 1 pc Chain Holder 2 halves 7 Basket 2 halves Flag Pole Holder 1 pc 11 Silver Washer 1 pc 13 160 Gram Green Disc 1 pc Flag 1 pc 9R 8R 10 Chain Support Pole 1 pc Knob Bolt 1 pc 12 160 Gram Blue Disc 1 pc 170 Gram Red Disc 1 pc
Assembly Instructions Remove all the contents from the carton and verify that you have all listed parts as shown on the parts list. Step 1 Begin with the assembly of the base (#1). Open the target base legs by pulling the diagonally opposite legs apart. Make sure that the inner pole in the base extends upward through the outer base pole. #1 Step 2 Insert the narrow end of the basket pole (#2) into the inner base pole aligning the pushbutton with the hole in the inner base pole.
Step 3 Slide the first half of basket section (#8R) with the sleeve onto the basket pole until the hole in the sleeve lines up with the basket pole pushbutton. Make sure the pushbutton protrudes completely through the hole. Step 4 Place the second half of the basket section (#8R) onto the support tab on the sleeve and press the basket sides firmly into tabs. Step 5 Insert the knob bolt (#9R) through the hole in the support tab and into the basket bar. Tighten securely.
Step 6 Assembling the chain supports: Insert the narrow end of the chain support pole (#3) into the basket pole by aligning the pushbutton with the basket pole hole. Make sure the pushbutton protrudes completely through the hole. Next, slide the chain support section with the sleeve onto the pole and align the hole in the sleeve with the pole pushbutton. Make sure the pushbutton protrudes completely through the sleeve hole.
Step 8 Tighten the flag pole support (#7) by inserting the flag pole (#5) through the hole of flag pole support. Rotate the flag pole support until the disk lays flat against the sleeve top. Note: Do not bend the flag pole by overtightening the flag pole support. Attach the four bungy cord hooks on the lower chain ring to the basket bars to keep the chains stable and prevent them from swinging when hit by a thrown disk.
Game Rules Disc Golf Toss 2 to 4 players, singles (2) or partners (4) Playing the Game: Disc golf is a flying disc game in which individual players throw a flying disc at a target. A player is charged one point every time the disc is thrown. The goal is to have the least number of throws and the lowest score. A hole is completed when a thrown disc lands inside the target basket.