Instructions / Assembly

Step 6

Assembling the chain supports:

Insert the narrow end of the chain

support pole (#3) into the basket pole by

aligning the pushbutton with the basket

pole hole. Make sure the pushbutton

protrudes completely through the hole.

Next, slide the chain support section with

the sleeve onto the pole and align the

hole in the sleeve with the pole

pushbutton. Make sure the pushbutton

protrudes completely through the sleeve

hole.

Step 7

Place the hole in the disk of the second half of chain support section onto the threaded

shaft. Tighten the chain support so the tabs on either end of the sections align with the

support bars and press the sections together. Place the silver washer (#10) onto the

threaded shaft and screw the flag pole support (#7) onto the threaded shaft.

#10