Owner Manual

Replacement of LED Light Rail

STEP ONE :

If the LED Light Rail needed to be replaced on the P7 Electronic Scorer side, Carefully unplug the

connector of P7 Electronic Scorer from the C2 Main Electronic Unit first.

Unscrew C9 wing Bolts and then unplug the C5 Lighting LED Rail A.

2016 Escalade Sports

For Customer Service Call 1-888-996-2729

STEP TWO :

unscrew C8 Screws, and separate C5 Lighting LED Rail A, C6 Lighting LED Rail B and C7 Lighting

LED Rail C from each other.

Align the male and female connectors of the well Lighting LED Rail, and Install them back to Side

Top Rail using C8 Screws as shown in the diagram.

Next, connect the plug of C5 Lighting LED Rail A.

Install the Side Top Rail back to the table top rail using C9 Wing Bolts .

Tighten, but do not strip out C8 screws .