User's Manual

ManualsBrandsTriva ManualsElectronicsSmart Safety Tag

TRIVA Smart Safety Tag User Manual

General Description:

The TRIVA Smart Safety Tag is to be used with mobile applications and hardware associated

with TRIVA, Inc. The TRIVA Smart Safety Tag, when used with the any mobile applications or

hardware associated with TRIVA, Inc., will provide unique identifying information of the object

or person the TRIVA Smart Safety Tag is adhered to. The TRIVA Smart Safety Tag is to be

mounted on any object via double sided very high bonding adhesive (VHB) tape that is attached

to the back of the TRIVA Smart Safety Tag. The device transmits a periodic low level wireless

signal that can be detected by mobile applications and/or hardware associated with TRIVA, Inc.

When mobile applications and/or hardware associated with TRIVA, Inc. are unable to detect a

TRIVA Smart Safety Tag signal, it is understood that there are no TRIVA Smart Safety Tags in the

vicinity of the mobile application and/or hardware.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own

expense.

Installation Materials Needed:

The TRIVA Smart Safety Tag comes equipped with a preinstalled battery that is expected to

have a battery life of 3 years to 4 years. The TRIVA Smart Safety Tag battery is not replaceable.

Mobile/Web applications associated with Triva, Inc. will notify the user of the TRIVA Smart

Safety Tag’s estimated battery level and will recommend when the user should replace the

TRIVA Smart Safety Tag. The TRIVA Smart Safety Tag will be shipped with custom die-cut 3M

VHB tape that fits precisely to the back of TRIVA Smart Safety Tag and can be attached by the

end user.

No other materials are need for installation.

Installation Instructions

1. The first step is to assign the TRIVA Smart Safety Tag’s unique identifier to a specific

object or person by using a mobile/web application associated with TRIVA, Inc. The

TRIVA Smart Safety Tag will have a QR code that equates to the TRIVA Smart Safety Tag

unique identifier that can be scanned by the mobile application or entered into a web

application in which it will prompt you to associate the unique identifier with a person

Summary of content (4 pages)

PAGE 1
TRIVA Smart Safety Tag User Manual General Description: The TRIVA Smart Safety Tag is to be used with mobile applications and hardware associated with TRIVA, Inc. The TRIVA Smart Safety Tag, when used with the any mobile applications or hardware associated with TRIVA, Inc., will provide unique identifying information of the object or person the TRIVA Smart Safety Tag is adhered to.
PAGE 2
or object. If the users phone does not have QR code scanning capabilities, the TRIVA Smart Safety Tag’s unique identifier is also displayed on the label of the TRIVA Smart Safety Tag to the right of the QR code. This can be manually entered in the mobile/web application to associate the unique identifier with an object or person. 2. When installing on an object, the user should try to find a smooth, flat, and clean surface to mount the device. Avoid mounting the device near any large metal objects. 3.
PAGE 3
2. After the TRIVA Smart Safety Tag has been decommissioned, the user can remove the device from the surface by simply prying the adhesive off with a flathead screwdriver. 3. If replacing the TRIVA Smart Safety Tag, the user can again scan the QR code of the TRIVA Smart Safety Tag or enter the unique identifier displayed on the TRIVA Smart Safety Tag. The user will then have an option to replace the TRIVA Smart Safety Tag.
PAGE 4
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications could void the user’s authority to operate the equipment.